Google+
217.643.2002 Shop

     
 

 
Our Products
Are ALL
American Made!

Machine your Cylinders

Machined cylinders for use of Moonclips can still be used with or without Moonclips, just as the
revolver was designed & manufactured.
  

Just send the cylinder assembly, NO gun.

Example of the machine your cylinder for Full Moonclips

Machining /  Many more Revolvers can be done. Call with questions.
(Some Colt, Rhino, Schofield & Foreign Model Copies)

To machine your cylinder we need the COMPLETE Cylinder Assembly.
DO NOT disassemble as we will do that.


S&W: Blue Steel, Stainless Steel & Titanium cylinders: 5, 6, 7 & 8 Shot.

J - Frame Models Examples:  5 - Shot
Model 36, 60, 640, 642, 442, etc. 38/357 Calibers

K - Frame Models Examples:  6 - Shot
Model 10, 19, 64, 66, etc. 38/357 Calibers

L - Frame Models Examples:  6 & 7 Shot
Model 586, 686 etc. 38/357 Calibers
Model 69 .44 Mag 5 – Shot

N - Frame Models Examples: 6 & 8 Shot
Model 27, 624, 625 LC, 629, etc.
  38/357 -  44/45 Calibers

X - Frame Models Examples: 5 - Shot
Model 460 converted to shoot .45 acp with moonclips
Model 500 converted to shoot .50 GI with moonclips


$150.00 to machine / chamfer and return your cylinder

$65 for (10) Stainless Steel Match Moonclips (.025)
$50 for Moon Clip Loading Tool (prevents bending)
$20 for Moonclip Stripper Tool (prevents  bending)

$285.00

Machining your S&W Model 25 & 625 45LC cylinder to shoot .45 acp.  
Y
ou can still shoot the original rimmed cartridge caliber without moonclips, just as you do before the modification.

$150 to machine & chamfer cylinder.
$20 for (10) .45 acp Blue Steel (.040) TK Moonclips

Total: $170.00

Rechambering your J, K, L & N cylinder to shoot 9mm: 5, 6, 7 & 8 Shot Cylinders

$300.00 to rechamber cylinder, machine & chamfer cylinder.
$75.00 for (10) 9mm (.035) S/S Moonclips

$375.00

Our work on cylinders rechambered to 9mm are LIMITED to our customer's using standard 9mm ammo or low pressure reloads, which are 34,000 psi chamber pressure or less.

Absolutley NO 9mm Nato, 9mm +P or 9mm +P+, all which are far beyond the 34,000 psi chamber pressure our conversion is intended for. Usually 38,500 psi, which WILL Stick!

If you try to use these high pressure ammo, you will experience cases sticking in all chambers.

We cannot warranty our work, if you disregard our warning/notice on high pressure ammo.

When rechambered to 9mm the cylinder will still shoot 38 SPL or 357 with or without the proper moonclip.

Ruger: Blue Steel, Stainless Steel Cylinders

Model Examples: 5 - Shot
Model LCR -
 38/357 Calibers

Model Examples: 6 - Shot
Model GP-100 -
 38/357 Calibers

Model Examples: 6 - Shot
Model Redhawk & Super Redhawk -
 38/357, 44 Mag & 45LC Calibers

$150.00 to machine / chamfer and return your cylinder
$65 for (10) Stainless Steel Match Moonclips (.025)
$50 for Moon Clip Loading Tool (prevents bending)
$20 for Moonclip Stripper Tool (prevents  bending)

$285.00

Machining your Ruger Redhawk & Super Redhawk 45 caliber cylinder to shoot .45 acp. You can still shoot the original rimmed cartridge caliber without moonclips, just as you do before the modification. Click on this RUGER link for further info on the Redhawk.

$150 to machine & chamfer cylinder.
$20 for (10) .45 acp Blue Steel (.040) TK Moonclips

Total: $170.00

Rechambering your Ruger LCR, Security Six & GP-100 cylinder to shoot 9mm: 5 & 6 Shot Cylinders

$300.00 to rechamber cylinder, machine & chamfer cylinder.
$75.00 for (10) 9mm (.035) S/S Moonclips

$375.00

When rechambered to 9mm the cylinder will still shoot 38 SPL or 357 with or without the proper moonclip.

Models Examples:  5 - Shot   
Model SP-101 -
 38/357 Calibers  
Gemini Customs will machine the SP-101
Ruger changed the ratchet star, rendering revolver impossible to machine for Moonclips. We do not machine any of them, new or older.

We do not machine any Taurus cylinders' because of the large variation of dimensions from cylinder to cylinder, prevents proper and consistent fitment of our products.


Just ship the cylinder assembly, payment, contact info (Work Order) and the work will be done.

In Shop time for machining cylinders is now 3-5 business days
Plus transportation both ways.


Payment can be by Credit Card or Certified Funds

tom@tkcustom.com

Ship to:

TK Custom
503 N Church St / PO Box 333
Thomasboro, IL  61878

9 AM - 5 PM
Central Standard Time
E-Mail:
tom@tkcustom.com

Shop: 217.643.2002

Copyrighted TK Custom, LLC,  2016 / All Rights Reserved. Created & Hosted By
TechPro.